Jan 28 2012

Juniper SRX: Initiating a Chassis Cluster “Manual Redundancy Group Failover”.

It is possible to initiate a failover state manually (from the CLI) with the request command.

A manual failover bumps up the priority of the redundancy group for the specified member to 255, triggering its state.
Continue reading


Jan 13 2012

JunOS: Copy & Paste configuration directly on terminal.

The command load replace terminal can be used to copy a configuration from a text file to a Juniper device.

After executing this command the router will start accepting configuration data via the paste option.
Continue reading